Can I change out a 24V AC or other AC voltage coil to 24V DC coil in the 100-C contactor product line?

In this video, Kevin York, the IC and Safety Specialist at ES&E, demonstrates how to properly rotate the coil assembly of a C100 contractor.

This video demonstrates how to rotate the coil assembly of a 100 C contactor properly. Key takeaways include the importance of this procedure if using pre-formed wiring modules to create a two or three-component starter setup or to access the contacts. The video explains the features of the contactor, including the plunger, auxiliary contacts, and the two rings that hold the contactor together. The process involves releasing the rings, removing the top portion of the contactor, removing the coil spring, lifting the coil out, rotating it 180 degrees, and then reassembling the contactor.