Drive Programming
      Back to home
      1. Knowledge Base
      2. Drives, Motors, & MCC
      3. Drive Programming

      What are my RSLinx Settings when using a 1203-USB Interface for PowerFlex Drives

      This article shows what the settings are in RSLinx for the 1203-USB Interface to be able to communicate with a PowerFlex Drive.

      Configure for RS-232 DF1 Devices

      Comm Port: COM3 (Note: Check the USB Port Settings on your computer to verify what COM Port the 1203-USB is connected to.)

      Device: 1770-KF2/1785-KE/SCANport

      Baud Rate: 115200

      Station Number: 00

      Parity: None

      Error Checking: BCC

      Stop Bits: 1

      Protocol: Full Duplex

      NOTE: Do not use the "Auto-Configure" 

       

      What are my RSLinx Settings when using a 1203-USB Interface for PowerFlex Drives