How can I buy more connectors for a Kinetix 5500 if I lost the ones that come in the box?

The Kinetix 5500 comes with all the connectors that are required to operate the drive. However, sometimes these connectors are misplaced or damaged. These connectors are not sold separately, however, they are sold in kits. See article.

For Kinetix 5500 drives that have the following missing connectors: power input, motor output, shunt resistor, brake wire connector, 24VDC control power connector.

Frame 1 and 2 Drives with Part numbers:

2198-H003-ERS
2198-H003-ERS2
2198-H008-ERS
2198-H008-ERS2
2198-H015-ERS
2198-H015-ERS2
2198-H025-ERS
2198-H025-ERS2
2198-H040-ERS
2198-H040-ERS2
Select:

2198-KITCON-PWR40

Frame 3 Drives with Part numbers:

2198-H070-ERS
2198-H070-ERS2
Select:

2198-KITCON-PWR70

For all Kinetix 5500 drives that have the following missing connectors: STO (Safe Torque Off) Connector, Digital Input Connector.

for spring terminal option (this is the kit that come in the box by default):

2198-KITCON-IOSP

for screw terminal option for digital inputs only:

2198-KITCON-IOSC

For all Kinetix 5500 drives that have the following missing connectors: DSL Feedback connector for VP-series motors.

2198-KITCON-DSL

For all Kinetix 5500 drives that have the following missing connectors: DSL Feedback Converter kit. For use with the MP-series motors and Kinetix 5500 drives. 

Please note: This kit is not included with the Kinetix 5500 upon purchase. It must be always be purchased separately. 

Important: there are some known issues with the use of this device with certain versions of MP-series motors and Kinetix 5500 drives. Please contact us for more details about these issues. 

 2198-H2DCK